Miller Spectrum 375 X-TREME Owner's Manual - Page 25

Browse online or download pdf Owner's Manual for Welding System Miller Spectrum 375 X-TREME. Miller Spectrum 375 X-TREME 36 pages. Air plasma cutting and gouging
Also for Miller Spectrum 375 X-TREME: Owner's Manual (40 pages), Owner's Manual (40 pages), Owner's Manual (36 pages), Owner's Manual (44 pages)

Print Page

Miller Spectrum 375 X-TREME Owner's Manual

6-5. Checking Or Replacing Filter Element

Tools Needed:

Torx 25

Y Check

bus

voltage

according to Section 6-4,

and be sure voltage is near

zero before touching any

parts.

Turn power Off, and disconnect

input power plug from receptacle.

Remove wrapper from unit (see

Section 6-3).

Filter Base

Filter

Filter Cup

Unscrew filter cup from base.

Remove cup.

Unscrew filter element from base.

Check filter element for dirt and

moisture, and replace if necessary.

Be sure that all parts are clean and

dry.

Reinstall filter element, and secure

filter cup.

Reinstall wrapper.

804 506-B

OM-225 216 Page 21