Burkert S030 Operating Instructions Manual - Page 2
Browse online or download pdf Operating Instructions Manual for Accessories Burkert S030. Burkert S030 11 pages. Inline fitting
Print Page
CAUTION
Warns against a possible risk.
▶ Failure to observe this warning can result in substantial
or minor injuries.
NOTE
Warns against material damage.
Indicates additional information, advice or
important recommendations.
Refers to information contained in these Operating
Instructions or in other documents.
▶ Indicates an instruction to be carried out to avoid a dan-
ger, a warning or a possible risk.
→
Indicates a procedure to be carried out.
Definition of the term product
The term "product" used in these Operating Instructions
always refers to the ftting type S030.
English
4
3.
BASIC SAFETY INFORMATION
This safety information does not take into account any con-
tingencies or occurences that may arise during installation,
use and maintenance of the product.
The local safety regulations for which the operating
company is responsible including the staff in charge of
installation and maintenance.
Risk of injury due to high pressure in the installation.
▶ Before any intervention on the installation, stop the
circulation of fluid, cut off the pressure and drain the
pipe.
▶ Observe the fluid temperature-pressure dependency
depending of the product used.
Risk of burn injury due to high fluid temperatures.
▶ Do not touch with bare hands the parts of the product
that are in contact with the fluid.
▶ Before opening the pipe, stop the circulation of fluid
and drain the pipe.
Risk of injury due to the nature of the fluid.
▶ Respect the prevailing regulations on accident preven-
tion and safety relating to the use of dangerous fluids.
English
6
2.
INTENDED USE
Use of the product that does not comply with the
instructions could present risks to people, nearby
installations and the environment.
The fitting type S030 is intended to measure the flow
rate of clean fluids in pipes. The fitting type S030 can
be combined with a flow transmitter or a flow indicator,
fitted with a bajonett connection.
▶ Use the product in compliance with the characteristics
and commissioning and use conditions specified in the
contractual documents, in the Operating Instructions
of the product and in the Operating Instructions of the
combined instrument.
▶ Use the product only in combination foreign devices
or foreign components recommended or approved by
Bürkert.
▶ Store, transport, install and operate the product
properly.
▶ Only operate a product in perfect working order.
▶ Only use the product as intended.
Various dangerous situations
▶ Do not use the fittings in PVC or PP in explosive
atmospheres.
▶ Do not use the product in an environment incompatible
with the materials it is made of.
▶ Do not subject the product to mechanical loads.
▶ Do not make any modifications to the product.
▶ Prevent any unintentional power supply switch-on.
▶ Only qualified and skilled staff can carry out the instal-
lation and maintenance work.
▶ Guarantee a defined or controlled restarting of the
process, after a power supply interruption.
▶ Observe the general technical rules.
English
5
5
English
7
7