Miller SuitCase X-TREME 12VS Owner's Manual - Page 21
Browse online or download pdf Owner's Manual for Welding System Miller SuitCase X-TREME 12VS. Miller SuitCase X-TREME 12VS 44 pages. Ce and non-ce models

5-4. Connecting Shielding Gas
3
2
5-5. Connecting Weld Cable
1
3
4
1
2
NOTICE − This feeder has a shield-
ing gas filter that requires special
attention when cleaning. See Sec-
tion 7-3 for proper cleaning instruc-
tions.
1
Gas Hose With 5/8-18
Right-hand Thread Fittings
Rear View
(User−Supplied)
.
Tighten gas hose fitting to a
maximum of 100 in. lbs (12
.
N
2
Shielding Gas Cylinder
.
Shielding gas pressure not to
exceed 100 psi (689 kPa).
3
Valve
4
Flowmeter
Close valve on cylinder when fin-
ished welding.
!
Turn Off wire feeder and
welding power source. Stop
engine on welding
generator.
1
User-Supplied Weld Cable
Follow wire manufacturer's recom-
mendations for weld cable polarity.
2
Male Connector
3
User-Supplied Female
Connector
Connect
connectors.
m).
256 620-A
male
and
female
256 621-A
OM-252203 Page 17