Miller XMT 425 CC/CV Owner's Manual - Page 18

Browse online or download pdf Owner's Manual for Welding System Miller XMT 425 CC/CV. Miller XMT 425 CC/CV 40 pages.

Print Page

4-4. Remote 14 Receptacle Information

A
J
K
I
B
C L N
H
M
D
G
F
E
*The remaining sockets are not used.

4-5. Supplementary Protectors

1
OM-257 486 Page 14
Socket*
A
24 VOLTS AC
B
C
D
REMOTE
OUTPUT
E
CONTROL
M
F
A/V
AMPERAGE
VOLTAGE
H
G
GND
K
Socket Information
24 volts AC. Protected by supplementary protect-
or CB2.
Contact closure to A completes 24 volts AC
contactor control circuit.
Output to remote control; 0 to +10 volts DC, +10
volts DC in MIG mode.
Remote control circuit common.
0 to +10 volts DC input command signal from
remote control.
CC/CV select
Current feedback; +1 volt DC per 100 weld am-
peres.
Voltage feedback; +1 volt DC per 10 weld volts.
Circuit common for 24 and 115 volts AC circuits.
Chassis common.
1
Supplementary Protector CB2
CB2 protects 24 volts AC portion of
Remote
14
receptacle
overload.
Press button to reset protector.
from
956142947_2-B