Miller XR-W AlumaPro Plus 25 ft Owner's Manual - Page 10
Browse online or download pdf Owner's Manual for Welding System Miller XR-W AlumaPro Plus 25 ft. Miller XR-W AlumaPro Plus 25 ft 36 pages. Ce and non-ce models air and water-cooled guns; 250 ampere (air) push-pull; 300 ampere (air) push-pull; 400 ampere (water) push-pull
Print Page
4-1. Specifications
Model
(CE Models)
XR-A AlumaPro Plus 15 ft (4.7 m)
XR-A AlumaPro Plus 25 ft (7.6 m)
XR-A AlumaPro Plus 35 ft (10.7 m)
(Non CE Models)
XR-A AlumaPro Plus 15 ft (4.7 m)
XR-A AlumaPro Plus 25 ft (7.6 m)
XR-A AlumaPro Plus 35 ft (10.7 m)
(CE And Non CE Models)
XR-W AlumaPro Plus 15 ft (4.7 m)
XR-W AlumaPro Plus 25 ft (7.6 m)
XR-W AlumaPro Plus 35 ft (10.7 m)
.
When using 1/16 in. (1.6 mm) wire, kit 230708 must be installed.
4-2. Environmental Specifications
A. IP Rating
This equipment is designed for indoor use and is not intended to be used or stored outside.
B. Temperature Specifications
Operating Temperature Range
14 to 104 °F (−10 to 40°C)
C. Information On Electromagnetic Fields (EMF)
!
This equipment shall not be used by the general public as the EMF limits for the general public might be exceeded during welding.
This equipment is built in accordance with EN 60974−1 and is intended to be used only in an occupational environment (where the general public
access is prohibited or regulated in such a way as to be similar to occupational use) by an expert or an instructed person.
Wire feeders and ancillary equipment (such as torches, liquid cooling systems and arc striking and stabilizing devices) as part of the welding
circuit may not be a major contributor to the EMF. See the Owner's Manuals for all components of the welding circuit for additional EMF exposure
information.
S
The EMF assessment on this equipment was conducted at 0.5 meter.
S
At a distance of 1 meter the EMF exposure values were less than 20% of the permissible values.
OM-245892 Page 6
SECTION 4 − INTRODUCTION
Welding Output Range
250 A at 60% Duty Cycle
300 A at 100% Duty Cycle
400 A at 100% Duty Cycle
Electrode
Wire Feed
Wire Diameter
Speed Range
Capacity
.030 To 1/16 in.
70 To 900 ipm
(0.8 To 1.6 mm)
(1.8 To 23 mpm)
aluminum wire
.030 To 1/16 in.
70 To 900 ipm
(0.8 To 1.6 mm)
(1.8 To 23 mpm)
aluminum wire
.030 To 1/16 in.
70 To 900 ipm
(0.8 To 1.6 mm)
(1.8 To 23 mpm)
aluminum wire
IP Rating
IP3X
Storage Temperature Range
−4 to 131 °F (−20 to 55°C)
Net Weight
(Torch Only)
2.5 lb (1.1 kg)
(less cables)
2.5 lb (1.1 kg)
(less cables)
2.9 lb (1.3 kg)
(less cables)
IP3X 2014−06
Temp_2016- 07
ce-emf 1 2010-10