Miller XT30 Owner's Manual - Page 23

Browse online or download pdf Owner's Manual for Welding System Miller XT30. Miller XT30 44 pages. Air plasma cutting and gouging
Also for Miller XT30: Owner's Manual (40 pages)

Print Page
Miller XT30 Owner's Manual
5-8.

Multi-Voltage Plug (MVP) Connection

Selecting Plug
3
3
5
5
7
7
Connecting Plug To Power Cord
Do not cut off power cord connector
and rewire. The power cord connec-
tor and plugs will work with stand-
ard NEMA receptacles. Modifying
power cord, connector, and plugs
will void product warranty.
Selecting Plug
1 Power Cord Connector From Welding
Power Source
Select plug for power supply receptacle
available at site. Not all plugs shown are
provided as standard with unit.
�
Complete Parts List is available at www.MillerWelds.com
2
2
4
4
6
6
2 Plug - NEMA Type 5-15P
3 Receptacle - NEMA Type 5-15R (Cus-
tomer Supplied)
4 Plug - NEMA Type 5-20P (Optional)
5 Receptacle - NEMA Type 5-20R (Cus-
tomer Supplied)
6 Plug - NEMA Type 6-50P
7 Receptacle - NEMA Type 6-50R (Cus-
tomer Supplied)
Follow electrical service guide for
230 VAC. Do not use plug rating to
size branch circuit protection.
1
1
Ref. 803812-C
Ref. 803812-C
Connecting Plug To Power Cord
Align arrow on plug with arrow on power
cord connector. Push together.
Tighten threaded collar. As threaded collar
is tightened, push plug onto adapter until
collar is completely tight.
Connect plug to receptacle.
OM-253555 Page 19