Miller XT30C Owner's Manual - Page 18

Browse online or download pdf Owner's Manual for Welding System Miller XT30C. Miller XT30C 40 pages.
Also for Miller XT30C: Manual (40 pages)

Print Page
Miller XT30C Owner's Manual

4-4. Serial Number And Rating Label Location

The serial number and rating information for this product is located on the back. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.

4-5. Selecting A Location

Dimensions And Weight
49 lb (22.2 kg)
not including torch
*Add 13/16 in. (21 mm) for handle.
Movement
2
Location And Airflow
10 in.
(254 mm)
OM-255 590 Page 14
.
A complete Parts List is available at www.MillerWelds.com
1
10 in.
(254 mm)
8-1/2 in.
(216 mm)
12-5/16 in.*
(313 mm)
16 in.
(406 mm)
1
Use handle to lift unit.
2
Use cart or similar device to move
unit.
3
To connect unit to 230 VAC input
power, a customer supplied plug is
necessary (see Section 4-11).
Locate unit near correct input
power supply.
!
3
loc_2 3/96 - Ref. 804 486-B / 804 487-B / 804 488-B
Lifting Handle
Hand Cart
120 VAC Receptacle
Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.