Miller ArcStation Owner's Manual - Page 14
Browse online or download pdf Owner's Manual for Welding Accessories Miller ArcStation. Miller ArcStation 20 pages.
Also for Miller ArcStation: Owner's Manual (44 pages)
Print Page
3-9. Installing Exterior Shelf
OM-247318 Page 10
1
3
EE and ZZ
!
Do
stabilizer bracket is installed
and leveling foot is adjusted
so that table is level.
1
Stabilizer Bracket
2
Leveling Foot
EE and ZZ
Install leveling foot in bottom of
stabilizer bracket.
Use supplied bolt EE and nut ZZ in
the top hole and bolt CC in the
bottom hole, and install stabilizer
bracket to side leg of end subframe.
Adjust leveling foot until the welding
CC
table is stable and level. Tighten
jam nut on foot.
3
Exterior Shelf Brackets
Use the supplied four bolts EE and
nuts ZZ and install shelf brackets to
side legs of end subframe.
4
Exterior Shelf
Use the supplied four bolts HH and
2
nuts YY and install shelf onto
brackets.
4
HH and YY
Tools Needed:
hex bit 3/16, 5/32 in.
not
load
shelf
until
1/2, 3/8 in.
level