Miller CoolBand II Original Instructions Manual - Page 31
Browse online or download pdf Original Instructions Manual for Welding Accessories Miller CoolBand II. Miller CoolBand II 40 pages. Integrated headgear cooling system
Print Page
4-1.
Adjusting The Headgear (Continued)
.
There
are
headgear
ments:
headgear
top,
tightness,
angle adjustment,
distance
ment, and tilt/resis-
tance.
1
Headgear Top Ad-
justment Straps
Adjust both headgear
straps for proper depth
on the head to ensure
correct balance and sta-
bility.
OM-262 902 Page 28
2
Headgear
five
ness
adjust-
To adjust, turn left or
right to desired tight-
ness.
adjust-
3
Distance
ment
Adjusts the distance be-
tween the face and the
lens. To adjust, press
tabs and slide forward or
back to desired position.
Release
sides must be equally
positioned for proper vi-
sion.)
Tight-
4
Is located on the right
side of head gear, and is
used to adjust forward
tilt of the helmet. To ad-
Adjust-
just, press tab and slide
clockwise
lens closer to face. Slide
tab counterclockwise to
position
from the face.
5
tabs
(Both
Turn clockwise to in-
crease resistance.
Tilt Adjustment
to position
lens
further
Tilt/Resistance