Miller SUITCASE 12RC Owner's Manual - Page 19

Browse online or download pdf Owner's Manual for Welding Accessories Miller SUITCASE 12RC. Miller SUITCASE 12RC 40 pages. Wire feeder with gun and meters
Also for Miller SUITCASE 12RC: Specifications (2 pages), Owner's Manual (36 pages), Owner's Manual (40 pages)

Print Page
Miller SUITCASE 12RC Owner's Manual

5-4. Connecting Shielding Gas

3

5-5. Connecting Weld Cable

1
3
4
2
5
1
2
NOTICE − This feeder has a shield-
ing gas filter that requires special
attention when cleaning. See Sec-
tion 7-3 for proper cleaning instruc-
tions.
1
Gas Hose With 5/8-18
Right-hand Thread Fittings
(Customer Supplied)
Rear View
.
Tighten gas hose fitting to a
maximum of 100 in. lb (12 NVm).
2
Shielding Gas Cylinder
.
Shielding gas pressure not to
exceed 100 psi (689 kPa).
3
Valve
4
Flowmeter
5
14-Pin Plug
Close valve on cylinder when fin-
ished welding.
!
Turn Off wire feeder and
welding power source. Stop
engine on welding
generator.
1
User-Supplied Weld Cable
Follow wire manufacturer's recom-
mendations for weld cable polarity.
2
Male Connector
3
User-Supplied Female
Connector
Connect
connectors.
263 836-A
male
and
female
263 837-A
OM-263984 Page 15