Miller T94i Series Owner's Manual - Page 17

Browse online or download pdf Owner's Manual for Welding Accessories Miller T94i Series. Miller T94i Series 40 pages. Auto-darkening helmets
Also for Miller T94i Series: Manual (32 pages)

Print Page
Miller T94i Series Owner's Manual
5-5.

Variable Shade Control

1
1 Mode Button
2 Increase (+) And Decrease (-) Buttons
Use the + and - adjustment buttons to adjust
the lens shade in the darkened state. Use
the table in Section 1-4 to select proper
shade control setting based on your welding
process. The shade ranges for each mode
are as follows:
Weld - No. 8 - No. 13 (XL Models No. 8 –
No. 14)
Cut - No. 5 - No. 8
Grind - No. 3 only
(R)
MEMO ( B )
1
2
X-Mode - No. 8 - No. 13 (XL Models No. 8 –
No. 14)
Start at the highest setting and adjust lighter
to suit the application and your personal
preference.
Variable Shade Adjustment Procedure
� Press Mode (On/Off) button to turn lens
On. Helmet control display will appear.
� Press Mode Button to select desired
function: Weld, Cut, or X-Mode.
� Use + and – adjustment buttons to se-
lect desired shade.
� Begin welding or continue with other
lens adjustments.
2
OM-255503 Page 15