Miller WP-26V Owner's Manual - Page 11
Browse online or download pdf Owner's Manual for Welding Accessories Miller WP-26V. Miller WP-26V 28 pages.
Print Page
3-1. Specifications
Amperage Rating
Cooling Method
Tungsten Size
Cable Options
Dimensions
Amperage Rating
Cooling Method
Tungsten Size
Cable Options
Dimensions
3-2. Duty Cycle
0
10
Minutes
NOTICE − Exceeding rated amperage can damage torch and void warranty (see Section 3-1).
SECTION 3 − SPECIFICATIONS
A-200 (WP-26)
200 Amps W/Argon Gas At 60% Duty Cycle DCEN; 150 Amps W/Argon Gas At 60%duty Cycle ACHF
12.5 ft (3.8 m) or 25 ft (7.6 m) One-Piece Rubber
12.5 ft (3.8 m) or 25 ft (7.6 m) Two-Piece Rubber
Length: 8 in. (203 mm);
Handle Diameter: 1.13 in. (29 mm)
Weight: 9.1 oz (258 g)
A-200F (WP-26F)
200 Amps W/Argon Gas At 60% Duty Cycle DCEN; 150 Amps W/Argon Gas At 60%duty Cycle ACHF
12.5 ft (3.8 m) or 25 ft (7.6 m) One-Piece Rubber
12.5 ft (3.8 m) or 25 ft (7.6 m) Two-Piece Rubber
Length: 8.5 in. (216 mm);
Handle Diameter: 1.13 in. (29 mm)
Weight: 11.05 oz (313 g)
Definition
Duty Cycle is percentage of 10
minutes that torch can weld at
rated load without overheating.
Model
Air
.020 Thru 5/32 in. (0.5 Thru 4.0 mm)
Handle Diameter: 1.13 in. (29 mm)
Model
Air
.020 Thru 5/32 in. (0.5 Thru 4.0 mm)
Handle Diameter: 1.13 in. (29 mm)
60% Duty Cycle At 200 Amperes Using Argon Gas w/DCEN
6 Minutes Welding
A-200V (WP-26V)
Length: 8.5 in. (216 mm);
Weight: 10.8 oz (306 g)
A-200FV (WP-26FV)
Length: 9 in. (229 mm);
Weight: 12.95 oz (367 g)
60%dutycycle
4 Minutes Resting
OM-225 428 Page 7
sb1.5* 8/93