Miller 1025 Operator's Manual - Page 8
Browse online or download pdf Operator's Manual for Camera Accessories Miller 1025. Miller 1025 13 pages. Fluid head
Print Page
Operating Instructions
3. Counterbalance Control
The counterbalance system was designed to neutralise the
effect of the camera weight when it is tilted. The Arrow 40/55
Fluid Head offers a 4 position counterbalance system which
can be operated via the COUNTERBALANCE SELECTOR (fig.
1). The COUNTERBALANCE SELECTOR must be operated
when the SLIDING PLATFORM is in a horizontal position. After
changing the Counterbalance setting it may be necessary to
tilt the camera back and forth to ensure that the CB spring has
engaged. The camera must be held securely while changing
the Counterbalance setting.
3.1 For safety ensure that Counterbalance position 4 is
selected.
3.2 Hold the camera and release the TILT LOCK, then gently
tilt the camera from a horizontal position forward then
backward and observe its response. If the Camera
'Springs Back' to the horizontal position then a lower
Counterbalance setting is required, select Counterbalance
position 3 and recheck, select lower setting again if
necessary. Correct counterbalance setting has been
acheived when minimum effort is required to move the
camera over the entire tilt range.
TIP Fine tuning can be achieved by adjusting the SLIDING
PLATFORM – see step 2.6.
Counterbalance Performance
300
250
200
150
100
50
0
2
4
6
Fig. 7
300
250
200
150
100
50
0
2
4
6
8
Fig. 8
7
Arrow 40
8
10
12
14
16
18
Camera Payload (kg)
Arrow 55
10 12 14 16 18 20 22 24 26 28 30
Camera Payload (kg)
20
22
24