Diamir Scout 11 Operating Instructions Manual - Page 4
Browse online or download pdf Operating Instructions Manual for Safety Equipment Diamir Scout 11. Diamir Scout 11 11 pages. Safety alubar system
Print Page
Operating instructions Safety Alubar System
EN
To exercise the warranty, service is required by a specialist dealer. The defective binding or defective binding parts must be provided to the specialist
6
dealer along with the warranty certificate. Upon receipt, Fritschi AG Swiss Bindings shall decide whether the defective binding is to be repaired or
replaced.
Consumer Disclaimer
The binding settings are consistent with the DIN ISO 11088 standard which applies to the mounting, adjusting and testing of the ski binding – ski
boot unit. The settings provided by the specialist dealer APPLY ONLY TO THOSE BOOTS FOR WHICH ADJUSTMENTS WERE MADE and may
not translate to different pairs of boots than tested by the specialist dealer. Accordingly, you are informed and acknowledge that the adjustments
provided by the specialist dealer may not be appropriate for variations in assorted boot configurations.
Place of jurisdiction
Swiss law is applicable to all disputes, and the place of jurisdiction is the head office of Fritschi AG Swiss Bindings.
Subject to modifications. Technical data and designs are subject to change at any time without notice.
Register your safety product and increase your warranty to three years instead of two
www.fritschi.swiss