Miller arrow 25 Operator's Manual - Page 4

Browse online or download pdf Operator's Manual for Camera Accessories Miller arrow 25. Miller arrow 25 13 pages. Fluid head

Print Page

Introduction

Thank you for purchasing the Arrow 25 Fluid Head. The Arrow

25 Fluid Head has been designed to suit payload capacities

from lightweight DVCAM up to standard conﬁguration ENG

cameras.

The robust design and construction of the Arrow 25 Fluid

Head offers maximum stability, accuracy and durability and

includes precision ball bearing mounted Fluid Drag Plate

system in the Pan and Tilt assembly to deliver true ﬂuid drag

performance over the entire temperature and payload range.

The Fluid Drag and the Counterbalance system were

designed to provide excellent control and repeatability and

offer progressive equal increments of drag and torque.

The Arrow 25 Fluid Head also offers Illuminated single control

location for operating Pan / Tilt, Counterbalance and viewing

Bubble level.

The Arrow 25 Fluid Head will give best performance when

used on a wide range of Miller tripods, including SOLO ENG

(#1505), Sprinter II (#1589, #1580, #1576) and HD (#931)

tripod. This will ensure maximum system stability to suit any

professional set-up. The Arrow 25 Fluid Head will suit most

industry standard 100 mm tripods as well, please refer to

manufactures' manual for mounting details.

Safety Instructions

Attaching/removing the camera.

Please use this manual to familiarise yourself with the operation

of the Arrow 25 Fluid Head and observe these instructions

to prevent any damage to your equipment. Ensure that all

equipment is operating correctly and free from defects and

damage, also please ensure that the tripod is steady, secure

and that the bowl is approximately horizontal when attaching

the camera. The operator is responsible for the safe operation

of this piece of equipment.

Do not exceed the maximum payload capacity of the Fluid

◗

Head.

Do not leave the camera unattended on the Fluid Head.

◗

Do not release the SLIDING PLATFORM LOCK whilst the

◗

camera is at an angle.

Do not adjust the tripod whilst the camera is attached to

◗

the Fluid Head.

Ensure PAN HANDLE CLAMP and CLAMP NUT is securely

◗

tightened.

Apply TILT LOCK when adding/removing equipment from

◗

the camera or when attaching/removing the camera from

the Fluid Head.

Hold camera securely whilst changing Counterbalance,

◗

Pan Drag or Tilt Drag settings.

Hold the camera securely whilst releasing the QUICK

◗

RELEASE KNOB.

Hold camera securely whilst adjusting the CLAMP NUT to

◗

level the Fluid Head.