Miller Subarc DC 1000 Owner's Manual - Page 23

Browse online or download pdf Owner's Manual for Portable Generator Miller Subarc DC 1000. Miller Subarc DC 1000 48 pages.

Print Page

SECTION 3 – MAKING WELD OUTPUT CONNECTIONS

Y ELECTRIC SHOCK can kill.

Do not touch live electrical parts.

Turn off welding power sources and disconnect input power before making any weld output con-

nections.

See ANSI Z49.1 and OSHA Title 29, Chapter XVII, Part 1910, Subpart Q (addresses at begin-

ning of manual).

Do not handle or come in contact with two live electrodes at the same time.

Y UNDERSIZED WELD CABLES can cause fire.

Work cable or electrode cable must be able to carry the weld output of the individual welding power

source (see Section 2-8).

Do not exceed duty cycle of welding power sources.

To Electrode

Connections For

DC Electrode Positive

Or AC Output

Y High weld output current hazard! Remove all metal jewelry, such as

rings and watches, and be careful with tools near output terminals.

High current can cause severe burns from hot metal if touched to

output terminals and unit is On. ALWAYS turn Off welding power

sources and disconnect input power BEFORE making weld output

connections.

Y If there are any questions regarding

this procedure, contact the factory be-

fore connecting units.

To Work

Connections For

DC Electrode

Negative Output

Y Turn Off welding power

source and disconnect input

power before opening ac-

cess door.

For dc electrode positive: