Miller T94 Series Manual - Page 15
Browse online or download pdf Manual for Motorcycle Accessories Miller T94 Series. Miller T94 Series 32 pages. Auto-darkening helmets
Also for Miller T94 Series: Owner's Manual (40 pages)
Print Page
4-6. Lens Delay Control
1
1
Mode Button
2
Adjust Button
3
Increase (+) And De-
crease (-) Buttons
Select Delay by pressing the
Adjust button. Use the + / −
buttons to adjust the time for
the lens to switch to the clear
state after welding or cutting.
The delay is particularly use-
ful in eliminating bright
after-rays present in higher
amperage
applications
where the molten puddle re-
mains bright momentarily
after welding. Use the + / -
buttons to adjust delay from
0 to 10 (0.1 to 1.0 second).
The delay ranges for each
mode are as follows:
Weld, Cut, X-Modes − 0 −
10
Grind Mode − No delay ad-
justment
.
There is no lens delay
adjustment in the Grind
mode.
Lens Delay Adjustment
Procedure
S
Press Mode (On/Off)
2
3
button to turn lens On.
Helmet control display
will appear.
S
Press Mode button to
select desired function:
Weld, Cut, or X-Mode.
S
Use Adjust button to se-
lect delay, and then
adjust to desired delay
using + / − buttons.
S
Begin welding or contin-
ue
with
adjustments.
OM-255503 Page 13
260482-4
other
lens