Miller Invision 352 MPa Auto-Line CE Owner's Manual - Page 24
Browse online or download pdf Owner's Manual for Inverter Miller Invision 352 MPa Auto-Line CE. Miller Invision 352 MPa Auto-Line CE 44 pages.
Also for Miller Invision 352 MPa Auto-Line CE: Owner's Manual (48 pages), Owner's Manual (44 pages)
Print Page
5-4. Remote 14 Receptacle Information
A
J
K
I
B
C L N
H
M
D
G
F
E
*The remaining sockets are not used.
5-5. 115 Volts AC Duplex Receptacle And Supplementary Protectors
OM-245171 Page 18
.
A complete Parts List is available at www.MillerWelds.com
24 VOLTS AC
REMOTE
OUTPUT
CONTROL
A/V
AMPERAGE
VOLTAGE
GND
1
Socket*
Socket Information
A
24 volts AC. Protected by supplementary protect-
or CB2.
B
Contact closure to A completes 24 volts AC
contactor control circuit.
C
Output to remote control; 0 to +10 volts DC, +10
volts DC in MIG mode.
D
Remote control circuit common.
E
0 to +10 volts DC input command signal from
remote control.
L
Wirefeed speed command, 0 to +10 volts DC out-
put signal from wire feeder.
M
CC/CV Select 0 to +10 volts DC
N
Wirefeed speed common.
F
Current feedback; +1 volt DC per 100 amperes.
H
Voltage feedback; +1 volt DC per 10 output recep-
tacle volts.
G
Circuit common for 24 volts AC circuits.
K
Chassis common.
1
115 V 60 Hz 10 Amp AC
Receptacle
2
Supplementary Protector CB1
3
Supplementary Protector CB2
CB1 protects duplex receptacle
from overload.
CB2 protects 24 volts AC portion
of Remote 14 receptacle from
overload.
Press button to reset supplement-
ary protector.
2
3
803691-E