burkle ViscoSampler Directions For Use Manual - Page 5

Browse online or download pdf Directions For Use Manual for Analytical Instruments burkle ViscoSampler. burkle ViscoSampler 12 pages.

Print Page

4. Remove the instrument from the medium to be

sampled.

5. Empty the sample into a suitable collecting cont-

ainer by sliding in the piston rod.

After taking the sample

1. Slide the wiping ring with the aid of the supplied

pusher down to wipe any remaining liquids.

2. Screw off the discharge funnel .

3. Screw off the guide nut .

4. Pull the handle and pull out the piston rod comple-

tely.

5. For cleaning purposes, the hexagon screw of the

suction piston can be opened by using the supplied

key.

6. Clean all parts. Use the cleaning brushes (see acces-

sories) for the inside of tubes.

Troubleshooting

Problem

The instrument doesn't

fit through the container

opening.

Poor suction power or

suction piston is leaky.

Accessories

Type

Cleaning brush

Drain safety stand

Sample bottle HDPE

More accessories can be found at www.buerkle.de

To eliminate the error

Srew off the discharge funnel and take the sample without it. Screw the discharge

funnel on again before emptying the sample.

Increase the contact pressure of the suction piston. Screw off the discharge funnel

and adjust the o-rings clockwise with a hexagon key (the o-rings must seal tightly

and should have a low friction).

Specification

PVC/stainless steel, 100 cm

Total length 117 cm, Ø 35 mm

250 ml

750 ml

English

Number

Item No.

5304-0100

5618-1000

0342-0250

0342-0750