3B SCIENTIFIC 1000568 Instruction Sheet - Page 2

Browse online or download pdf Instruction Sheet for Accessories 3B SCIENTIFIC 1000568. 3B SCIENTIFIC 1000568 4 pages. Displacement sensor

Print Page
4. Apparatus supplied
1
Displacement sensor
1
Stand rod with thread, 120 mm
1
8-pin miniDIN cable, 1 m
1
Nylon thread, 1 m, 1 mm diam.
1
Instruction manual
5. Example experiment
Recording a pV diagram for a G-model Stirling
TM
motor using 3B NETlog
Required equipment:
1 Stirling Engine G
TM
1 3B NETlog
(115 V)
or
TM
1 3B NETlog
(230 V)
TM
1 3B NETlab
1 Displacement Sensor
1 Relative Pressure Sensor
±1000 hPa
1 Sensor Holder for
Stirling Engine G
1 DC Power Supply
0 – 20 V, 0 – 5 A (115 V)
or
1 DC Power Supply
0 – 20 V, 0 – 5 A (230 V)
Experiment leads
Fig. 1 Experiment set-up for recording the pV diagram of a G-model Stirling engine
TM
and 3B NETlab
1002594 / U10050
1000539 / U11300-115
1000540 / U11300-230
1000544 / U11310
1000568 / U11371
1000548 / U11323
1008500 / U11372
1003311 / U33020
1003312 / U33020
1002843 / U138021
•
Set up the experiment as in Fig. 1.
•
Wrap the thread around the displacement sen-
sor's pulley as in Fig. 2.
•
Turn on the 3B NETlog
automatically detect the sensor box.
•
Connect the Stirling engine's DC motor to the DC
power supply and set an output voltage of 6 V so
that the Stirling engine operates at medium
speed.
•
Open the 3B NETlog
•
Only allow the Stirling motor to operate at high-
speed for short periods so as not to overstress
the displacement sensor.
•
The packaging should be disposed of at local
recycling points.
•
Should you need to dispose of the equipment
itself, never throw it away in normal domestic
waste. Local regulations for the disposal of elec-
trical equipment will apply.
2
TM
unit and wait for it to
TM
template "Stirling engine G".
6. Disposal