AquaPRO 03AS311 Instruction Manual - Page 2

Browse online or download pdf Instruction Manual for Water Filtration Systems AquaPRO 03AS311. AquaPRO 03AS311 8 pages. All in one series complete pond and filter system

Print Page

CONGRATULATIONS ON YOUR PURCHASE OF THIS

PRODUCT BY AQUAPRO, THE ANSWERS FOR YOUR

WATERGARDEN MADE EASY.

TECHNICAL SPECIFICATIONS

Model

Transformer

1000

240V / 12V

2000

240V / 12V

* SUBJECT TO VARIATION ACCORDING TO LOAD.

BENEFITS

The AQUAPRO All in One Series Complete Pond and Filter System is designed to clean pond and water feature water

utilising the latest advanced technology.

• Mechanical & Biological Filtration

• 5W/9W Ultraviolet Clarifier for green water clarification.

• Powerful 1000/2000 L/hour pump with wear resistant

ceramic components

IMPORTANT SAFEGUARDS

Please read the operating instructions and familiarize yourself with the equipment before placing it

in service. Correct and safe use of the system requires strict compliance with the safety instructions.

For safety reasons persons less than 16 years of age, or infirm persons, or pets, or people that are not

familiar with these instructions should not use this equipment.

Any damage of the equipment or unmerited operation

will bring dangerous UV Rays to the skin and eyes. So if

there is any damage of the equipment, it must not to be

used. The equipment should be placed out of reach of

children.

• For your own safety, disconnect from the power supply

before any maintenance of any equipment is attempted

on the tank or water body.

• Be sure the equipment is submerged completely in the

water. The depth should not be greater than 2m.

• Do not operate the pump if the appliance or any

components of the system, such as the power cable,

have been damaged.

• Always use a properly grounded power supply that is

connected to an RCD with a rated residual operating

current not exceeding 30mA. As per AS/NZS

3350.2.41:1997

• The drip loop method should be used to prevent water

from traveling down the cable and onto the plug or

power supply. If the plug does get wet, do not unplug

the cable. Disconnect the circuit breaker that supplies

power to the power supply point. Then unplug and

examine the plug and power supply point for presence

of water. If the power point has become wet, you should

consult an electrician before using the power point

again.

AQP All in One 1000 Instructions.indd 2

Power

UV-Clarifier

Consumption*

Power

24W

72W

A Q U A T E C E Q U I P M E N T . C O M

Max

Water

IP Rating

Head

Flow

Transformer

1000 L/H

IP44

2000 L/H

IP44

• Dual Flow Control T-Piece

• Multiple fountain nozzles help aeration of water

• 12V Low Voltage Power System for safe in-pond

operation.

• Always unplug the pump from the power supply when

not in use or before performing any maintenance on the

pump or in the pond. Never pull the cable to disconnect

the plug from the power supply. Grasp the plug and pull

to disconnect.

• Always unplug the appliance from the power supply

when not in use or before performing any maintenance.

• If required, have a qualified electrician install a

weatherproof power supply point near to the pond or

water-feature (within the cable length of the appliance).

• Do not install or store the appliance where it will be

exposed to extreme hot or cold temperatures. Do not

use in water above 35°C.

• Do not cut the cable as this will result in voiding your

warranty.

• Care should be taken to arrange the power cable so

that it cannot be accidentally tripped over or pulled.

• Do not attempt to repair the electrical appliance

yourself. Return to an authorized service centre or place

of purchase if a fault occurs, (regular maintenance is not

considered repair and is required by user).

IP Rating

Outlet Thread

Pump & UVC

Size

IP68

1/2 INCH MALE

IP68

1/2 INCH MALE

11/7/17 11:35 am