Burley ENCORE User Manual - Page 5

Browse online or download pdf User Manual for Stroller Burley ENCORE. Burley ENCORE 12 pages. Burley 2-wheel stroller kit
Also for Burley ENCORE: Owner's Instruction And Safety Manual (15 pages), Brochure & Specs (5 pages), Owner's Instruction And Safety Manual (12 pages), Installation Instructions (2 pages), Owner's Instruction And Safety Manual (8 pages), Owner's Instruction And Safety Manual (20 pages), Owner's And Safety Manual (8 pages)

Print Page

On the right side, remove the old

catch from the frame saving the

Phillips head bolt. Install the new

catch using the existing Phillips

head bolt and new standard nut

provided. Tighten securely.

(This can be done with the No. 2 Phillips driver.) The fabric is rip resistant to prevent

the hole from growing

Check that the new roll bar catch and hinge parts and the

roll bar is properly installed. Check the attachment points for

loose elements. Failure to do so could result in serious injury.

Replace the roll bar into the

new hinge. Use the pre-existing

1.5 inch hex bolt from the old

hinge and the new jam locking

nut provided. Tighten until

the end of the bolt is ﬂ ush or

slightly protrudes beyond the

nut.

Locate the pair of handle receiver

mounting holes on the bottom of

both the hinge and catch (See 1 and

2 on diagram to the left).

Carefully punch or cut a hole

through the trailer fabric, small

enough to allow a bolt to pass

through to the mounting holes.

Burley Walk 'n Roller Manual; models 2003 and earlier