AQUAPURE Ozone Technology AOT-D-200 Operation Manual - Page 2

Browse online or download pdf Operation Manual for Air Cleaner AQUAPURE Ozone Technology AOT-D-200. AQUAPURE Ozone Technology AOT-D-200 3 pages. Ozone module

Print Page

The Aluminum part and the central electrode of the generator are with high voltage which could

isolate

be 7KV. Do

e installing or testing the unit;

Any servicing or maintenance should only be carried out by approved and qualified personnel;

D. All installations should only be carried out by qualified electricians.

 Attention:

There are 3 types gases can be used for ozone generation: Ambient air, dry air and oxygen;

When use this unit, you should have power adaptor, cooling fan,air pump or venturi, silicone tube,

check valve,ect;

3. Ozone module introduction:

4. Air pump system: for air /water treatment

Air pump for water treatment system, bubble diffusers(similar to a fish tank air stone) are a popular ,

inexpensive method to inject ozone into water, the ozone gas transfer area occurs immediately at

the interface between the ozone bubble surface and the surrounding water. As the ozone bubble

rises the gas at the bubble edge will transfer into the water. Using a diffuser requires enough

pressure to overcome the height of the water and any restrication in the diffusers due to hole size.

Drawing below:z

this part to metal or any surface that would possibly lead to a conductivity whil