Burley Tools R1630 Manual - Page 7

Browse online or download pdf Manual for Power Tool Burley Tools R1630. Burley Tools R1630 9 pages.

Print Page
Cap nozzles
WARNING!
Risk of injury!The nozzle must not be replaced until the device has cooled off and
has been disconnected from the mains.
> The air-blast nozzle (G) protects panes of glass, for example, from being heated up by
diverting the air current.
> The reducing nozzle (H) produces a precise air current which can be used for deforming
synthetic materials, for example.
> The reflector nozzle (I) produces a flat air current which can be used for thawing frozen
water pipes, for example.
Check before switching on!
WARNING!
Risk of injury!The product must only be put into operation if no defects are found.
It is crucial that any defective parts are replaced before the product is used again.
Check the safe condition of the product:
- Check that the air inlet openings are not blocked.
- Check all parts to make sure that they fit tightly.
- Check whether there are any visible defects: broken parts, cracks, etc.

Switching on/off

NOTICE!
Risk of product damage!Always maintain a minimum distance of 25 mm between
the nozzle and the surface to be treated.
NOTICE!
Risk of product damage! Never use the product with the air inlet openings
pointing downwards.Dirty air can be sucked in.
NOTICE!
Risk of product damage!
The product must always be used with one of the cap nozzles.
WARNING!
Risk of injury!Use the stand (F) for resting the device. Don't put the device down
on any inflammable surface.
06