Diamond PPL-800 Manual - Page 14

Browse online or download pdf Manual for Commercial Food Equipment Diamond PPL-800. Diamond PPL-800 20 pages.

Print Page

3.2 ELECTRIC CONNECTIONS

THE EQUIPMENT IS SUPPLIED WITH AN ELECTRIC CABLE TO BE CONNECTED TO A

MAGNETO-THERMIC MAIN SWITCH WHICH STOPS THE MACHINE WHEN THE OPERATOR COMES

IN FORTUITOUS CONTACT WITH THE ROTATING ELEMENTS.

IT IS IMPERATIVE THAT THE EQUIPMENT IS WELL GROUNDED ACCORDING TO THE REGULATIONS

IN FORCE

THE MANUFACTURER DECLINES ANY AND ALL RESPONSIBILITY FOR DIRECT AND INDIRECT

DAMAGES WHICH MAY ENSUE FOR NON-COMPLIANCE WITH THE REGULATIONS IN FORCE.

V.400/3/50+N

ALL THE DIVIDER OF THE SERIES "PO" ARE MANUFACTURED 3- PHASE

HZ.OR OR

V.230/1/50

SINGLE PHASE

WHENEVER THE VOLTAGE DIFFERS FROM THE ABOVE MENTIONED ONES, PLEASE APPLY TO

THE MANUFACTURER, OR THE AUTHORIZED DISTRIBUTOR.

ATTENTION!

BEFORE THE FINAL CONNECTION OF THE MACHINE TO THE MAIN LINE, WHEN THE

MACHINE IS 3PHASE CONNECTION IT IS NECESSARY TO CHECK THE ROTATION WAY OF THE

KNIFE. (TIME WAY)

IF THE ROTATION IS NOT TIME WAY IT IS NECESSARY TO CHANGE IN CONNECTING PLUG TWO

OF THE 3 WIRES.

3.3. SAFETY MEASURES AND TRAINING THE FINAL USER

THE SKILLED PERSONNEL IN CHARGE OF THE INSTALLATION AND ELECTRIC CONNECTIONS

IS RESPONSIBLE OF THE TRAINING OF THE FINAL USER, WHICH MUST ALSO BE INFORMED ON

THE SAFETY MEASURES TO COMPLY WITH.

THIS INSTRUCTION MANUAL COMES WITH EACH EQUIPMENT.

4) USE OF THE EQUIPMENT

THE DIVIDER PO30EL HAVE BEEN STUDIED FOR THE PRODUCTION OF DIFFERENT PORTIONS

FROM 20 GR UP TO 800 GR.

4.1 CONTROLS

ALL CONTROLS ARE ON THE PANEL LOCATED ON THE RIGHT SIDE OF THE MACHINE.

ON THE LEFT SIDE YOU FIND THE HANDLE FOR THE MECHANICAL FEELER.