Diamond VK38-200 Manual - Page 3

Browse online or download pdf Manual for Commercial Food Equipment Diamond VK38-200. Diamond VK38-200 20 pages.
Also for Diamond VK38-200: Installation Manual (13 pages), Technical Manual (14 pages), Technical Manual (14 pages)

Print Page

Thermostat

The thermostat is placed in the control panel, see fig. 2.0.

The thermostat has been pre-set and in most cases it is not necessary to adjust the settings.

When turning on the cabinet the display will show the current temperature in the cabinet.

Display set temperature:

Press this key and the display will show the set temperature. Press the key again to return to

normal reading

Set new temperature:

Press this key and the display shows the set temperature.

Press this key to increase the set temperature.

Press this key to lower the set temperature.

Press this key to save the new settings. The display will flash with the new value and will

then return to normal reading.

Alarm codes:

PF1 Flashing in the display: indicates that the cabinet sensor is defective.

The cabinet will strive to keep the set temperature until it has been repaired.

Fig. 1.9

Fig. 2.0