Diamond IE140/R9G Instruction Manual - Page 8
Browse online or download pdf Instruction Manual for Refrigerator Diamond IE140/R9G. Diamond IE140/R9G 9 pages. Refrigerated cabinets
Print Page
2) Protect the food and its aroma with some sort of an airtight or plastic system, arranging it
so that there is good air circulation.
3) Avoid opening the doors frequently, as far as it is possible, and more importantly, do not
leave them open.
4) Do not load the cabinet over its loading level.
5) Temporary interruption of the power supply.
If the interruption does not exceed 20 minutes, it is not necessary to take any precautions,
just avoid opening the doors as far as it is possible, to prevent the temperature from rising.
If the interruption exceeds 20 minutes, you must make sure that the food does not exceed
the critical points, checking that it is not affected and avoid opening the doors.
The minimum temperatures so that the food does not start to deteriorate are:
Type of unit
Refrigeration
Frozen food maintenance
Precautions
2.2
1) Stability is guaranteed, even with the doors open, although it is totally prohibited to lean
on them.
2) In the event of a breakdown, it is prohibited to approach the refrigerator if the floor is wet
or with damp hands.
Limits
2.3
See plate
3
MAINTENANCE
With these guidelines, we would like to offer both you and the technical assistance service help so
that the cabinet always works perfectly throughout its useful life.
We will deal with the cleaning you can carry out as well as a quick machine check before contacting
the technical support service. We hope this will be useful.
USER CLEANING
3.0
Before carrying out any cleaning operations, the appliance must be disconnected from the socket,
and the power switch turned to OFF or 0.
The cabinets are equipped with a waste pipe for cleaning, as well as for collecting the possible flow
of liquids from the food. It is essential to remove and clean the waste pipe plug during the cleaning
operation, to prevent it from being blocked up with solid waste. This is so that any liquids present
do not become stagnant.
MACHINE CHECK
3.1
If you have to call for a repairperson, you can check the cabinet before ringing. In some cases,
the operating faults that can occur are caused by something simple that the users themselves can
solve.
The following are examples:
a) The refrigerator does not work
Check that electricity reaches the refrigerator by checking if the power switch is on.
b) Temperature too low
Check that there are no heat sources nearby.
Check that the thermostat cut off point is very near to 0 ºC/-18 ºC.
Check that the goods load is perfectly positioned and does not obstruct the outlets of the inner
fan, and that the time it has been inside is sufficient to cool the products.
Minimun temperature in the product
+ 10 C
- 15C
21