Diamond CGE11 N 230/1 Installation - Use - Maintenance - Page 9
Browse online or download pdf Installation - Use - Maintenance for Oven Diamond CGE11 N 230/1. Diamond CGE11 N 230/1 12 pages. Electric fan ovens
Also for Diamond CGE11 N 230/1: Installation - Use - Maintenance (11 pages), Installation - Use - Maintenance (12 pages), Installation - Use - Maintenance (12 pages), Installation - Use - Maintenance (12 pages), Manual (12 pages)
Print Page
DISCONNECT THE APPLIANCE ELECTRIC
SUPPLY, BEFORE CARRYING OUT ANY
OPERATION.
After replacing an electrical system component,
check it is correctly wired.
VENTILATED OVEN
Replacing the heating element
- Open the door.
- Remove the inner panel.
- Remove and replace the component.
- Refit all parts.
- Following, in reverse order, the sequence used for
their removal.
Replacing
the
working
thermostat, motor, timer and spies
- Open the door.
- Remove the wrap.
- Remove the inner panel.
- Remove and replace the component.
- Refit all parts.
- Following, in reverse order, the sequence used for
their removal.
14. MAIN COMPONENTS
- humidification push button
- signal light for grill
- grill timer
- timer signal light
- on/off timer
- thermostat signal light
- thermostat
- engine
thermostat,
safety
16