Aquasana AQ-CWM2-B Owner's Manual - Page 5

Browse online or download pdf Owner's Manual for Water Filtration Systems Aquasana AQ-CWM2-B. Aquasana AQ-CWM2-B 7 pages. Countertop water filter clean water machine

Print Page

TROUBLESHOOTING GUIDE

What should I do if my system won't run?

• Make sure the system is plugged into a power source.

• Ensure water tank is fully attached to filtration dock.

• Make sure water tank contains water. System will not run without water.

• Ensure filter and filter chamber lid are properly attached.

• Ensure dock button is being held for the proper amount of time.

What if water is leaking from the system?

• Ensure the water tank is fully attached to the filtration dock.

Why does my water look milky or cloudy?

• Cloudy or white water is a result of air bubbles that are trapped within the

system. This is very common and not harmful. The air bubbles will dissipate

over time.

Button Functions

Function

Quick Press On

Quick Press Off

Dispense water

Stop dispensing water

Initiate filter flush process

Start filter flush

Light Indicators

Light Status

No light

Solid red/blue combination

Solid blue light when dispensing water

Blink blue

Solid red light (5 seconds)

Blinking red when system flushing

Blinking red to blue

Blinking blue then solid blue

Alternating blue and red

while dispensing water

Solid red while dispensing water

Blinking red while in standby mode

Button Action

Press button 1X

Press and hold button until desired amount is dispensed

Release button hold

Press button 3X rapidly

Press and hold for 1 second

Indication

System unplugged, standby mode, or flush not initiated

Initial system plug in

Dispensing filtered water

System is readying to dispense water

Filter flush process initiated

Flush in process

Finishing flush

Filter flush complete

Change filter soon

Change filter now

1. Twist filter chamber cap to the left

and remove dirty filter from cap.

Discard dirty filter.

3. Fill water tank and place on

dispenser dock.

5. Press and hold dock button for

1 second to begin flush. Light will

blink red during the 60 second clean.

1 Sec.

60 Sec.

FILTER REPLACEMENT

2. Remove plastic from clean filter. Press

clean filter into filter chamber cap

ensuring a snug fit. Insert into housing

unit and twist right to close.

4. Press dock button 3 times quickly.

Light will illuminate red for 5

seconds.

5 Sec.

6. Once the flush is complete, light

blinks blue for 5 seconds, then

illuminate solid blue for 5 seconds.

5 Sec.