Aquasana EQ-FE20 Owner's Manual - Page 5

Browse online or download pdf Owner's Manual for Water Filtration Systems Aquasana EQ-FE20. Aquasana EQ-FE20 16 pages. Whole house water filter iron filter

Print Page

Before installing

• Lay out system in appropriate configuration. Improper sequence

of equipment will affect performance and could possibly damage

your system.

• Pick an appropriate installation location. Dimensions of systems vary.

– Iron Filter System with Well Water Rhino:

54" x 57" (LxH)

– Iron Filter System with Salt-Free Conditioner + Well Water Rhino:

66" x 57" (LxH)

• Install housings at appropriate height for easy filter changes.

- Iron Filter System: 30" high

- Iron Filter System + Rhino Water Filter: 37.5" high

– If attaching to a Rhino Well Water system, it should be installed at a

minimum height of 37.5" to align inlets.

• For all installations: Anticipate the need for additional parts and pieces

including but not limited to pex tubing, clamps, and mounting screws

to install unit properly (available at a local home improvement stores or

through your plumbing contractor). Due to the varieties of home design,

not all configurations can be addressed in this guide.

• DO NOT install this filter where the line pressure may exceed 100 psi.

The operating pressure range for this filter is between 20psi – 100psi.

• Install on cold water lines only 40°– 90°F (4.4º – 32.2ºC).

• Installation of the filtration system must comply with existing state and

local plumbing codes. Aquasana and its manufacturer are not liable for

consequential or incidental damages due to improper installation.

• DO NOT install the unit on its side. It must be installed upright

to maximize contact with media bed.

SYSTEM CONFIGURATION