Aquasana EQ-AST-WH-C Owner's Manual - Page 8
Browse online or download pdf Owner's Manual for Water Dispenser Aquasana EQ-AST-WH-C. Aquasana EQ-AST-WH-C 12 pages. Whole house salt-free water conditioner
Also for Aquasana EQ-AST-WH-C: Installation Instructions (5 pages), Owner's Manual (12 pages)
Print Page
INSTALLATION STEPS
6
5
Install Shut-off Valve and Ensure Spacing
1. Using a pipe cutter, cut into the main water supply line to install
the shut-off valve.
2. Loosely fit shut-off valve to calculate proper spacing of components.
3. Measure distance for Pre-Filter, Salt-Free Water Conditioner tank,
and optional add-ons (Rhino Tank, Post-Filter, and UV) and mark
pipe accordingly.
If you're installing additional add-ons make sure to read through
those separate installation manuals prior to fully installing your
complete system.
NOTE: DO NOT cut more pipe than necessary. You can cut more pipe
later if needed. If you're also installing a Pro-Install Kit or bypass loop,
do so at this time.
Ensure proper spacing to fit Pre-Filter, Salt-Free Water Conditioner,
Incoming
water supply
Cut Pipes
6
Cut pipe along the marked sections from step
5 and clean ends of pipe. Ensure there are no
burrs, sharp edges or deep scratches.
NOTE: Cut tubing as straight as
possible with a utility knife, or
an appropriate pipe cutter for
copper tubing or PVC.
and any optional add-ons
Outgoing
water supply