3B SCIENTIFIC PHYSICS Escola 2 1006811 Instruction Sheet

Browse online or download pdf Instruction Sheet for Multimeter 3B SCIENTIFIC PHYSICS Escola 2 1006811. 3B SCIENTIFIC PHYSICS Escola 2 1006811 5 pages.

Print Page

3B SCIENTIFIC ® PHYSICS

Instruction sheet

11/14 SD/UD

The Escola 2 multimeter is designed to display

electrical measurements in the ranges and

measurement environments specified in its tech-

nical data.

It conforms to safety regulations for electrical

measurement, control and laboratory equip-

ment, as specified in DIN EN 61010-1, protec-

tion class 2 and to excess voltage category CAT I

for up to 30 V. It is intended for measurements on

experiments and laboratory apparatus. It is not

approved for measurements on low-voltage dis-

tribution equipment, such as sockets, fuses, etc.

CAT I: Signal layer, telecommunications, elec-

tronic equipment with only minor excess voltage

transients

CAT II: Domestic appliances, mains sockets,

portable instruments etc.

Multimeter Escola 2 1006811

1. Safety instructions/using the equipment safely

1 Meter display with mirror scale

2 Slotted screw for zero calibra-

3 Adjustment knob for zero cali-

4 Measurement range dial

5 Operating mode switch

6 Safety measurement socket

7 Safety ground socket

CAT III: Supply via buried cabling, built-in swit-

ches, automatic circuit breakers, sockets or

contactors

CAT IV: Equipment and installations supplied,

for example, by overhead mains cables and

therefore subject to greater risk of lightning

strikes. This includes, for example, main swit-

ches at the building mains feed, electricity me-

ters and ripple control receivers.

Safe operation of the multimeter is guaranteed if

it is solely used as specified. Safety cannot be

guaranteed, however, if the multimeter is used

incorrectly or handled without due care and at-

tention. In order to avoid serious injury due to

current or voltage shocks, the following safety

instructions are to be observed at all times:

tion

bration