Diamond RFE 12 Instructions For Use And Installation - Page 8

Browse online or download pdf Instructions For Use And Installation for Fryer Diamond RFE 12. Diamond RFE 12 13 pages.

Print Page

- Pour oil into the container when heating elements are cold. The oil level must be be-

tween the MIN and MAX marks.

- Turn the thermostat control knob (n°3 on picture) to the desired position.

- When the orange pilot light is off, your deep fryer is ready for cooking.

- Fill the basket in and plunge it slowly into the oil.

- When cooking is finished, lift the basket and set it on its stand.

Safety thermostat

In case of overheating or lack of oil, your deep fryer will automatically stop. Unplug it

and let it cool. Then check the oil level:

1) Oil level is too low: add some oil and reload the knob (n°2 on picture).

2) Oil is too old: change it and reload the knob (n°2 on picture).

3) Other cases: call your after sale service.

Stopping the appliance

- Set the thermostat control knob to zero.

- Unplug the appliance.

- Let the device cool.

- To reuse the oil, open the draining tap and pour the oil through a filter to eliminate the

cooking residues

- Clean the appliance (See 6.Cleaning)

d) Breakdown / repair:

In case of breakdown or of damaged part, please call your after-sales service and confide any

technical operation to qualified person.

When you contact the after-sales service of your distributor or your store, give him the com-

plete reference of your device (commercial name, type and serial number). This information

appears on the visible descriptive plate behind the device.

VI CLEANING AND MAINTENANCE

- Let cool completely the device and the oil before any technical intervention or cleaning.

- Unplug the machine and remove the control unit before cleaning.

- For cleaning, only use non-abrasive products, clean regularly the external walls of your

device with warm water and wash liquid: avoid the abrasive towelling. Rinse your device

with a wet sponge.

- Caution : do not damage the heating element wires during cleaning

- Never clean the device under a water jet, the infiltrations would risk to damage it in a irrep-

arable way.

- Never immerse the control unit, the cord or the plug in the water or quite other liquid to

avoid any electric shock.