Panasonic AG-HPX500 Menu Information - Page 9

Browse online or download pdf Menu Information for Camcorder Panasonic AG-HPX500. Panasonic AG-HPX500 16 pages. Broadcast cameras
Also for Panasonic AG-HPX500: Brochure & Specs (16 pages)

Print Page

RECORDING SETUP screen

Item

Selects the recording format for P2 card.

●59.94Hz System: 1080i/60i, 1080i/30P, 1080i/24P, 1080i/24PA, 720P/60P, 720P/30P, 720P/24P,

REC FORMAT

●50 Hz System: 1080i/50i, 1080i/25P, 720P/50P, 720P/25P, 720P/25PN, 576i/50i, 576i/25P

480i (576i)

Selects the 480i (576i) recording mode.

●DVCPRO50/DVCPRO DV

REC MODE

Selects the special recording mode.

REC FUNCTION

●NORMAL, INTERVAL, ONE SHOT, LOOP

Selects the one-shot recording time.

ONE SHOT TIME

●1F, 2F, 4F, 8F, 16F, 1s

Sets the interval time (INT) for interval recording (INTERVAL REC).

INTERVAL TIME

●2F, 4F, 8F, 16F, 1s, 2s, 5s, 10s, 30s, 1m, 5m, 10m

START DELAY

Sets the START delay time for INTERVAL REC and ONE SHOT REC.

Sets PRE RECORDING to ON or OFF. (Fixed to 3 seconds for HD and 7 seconds for SD)

PREREC MODE

●ON, OFF

Selects the time code correction mode when recording the time code output by the internal time code

generator.

●DF: Uses the drop frame mode.

TC MODE

●NDF: Uses the non-drop frame mode.

The non-drop frame mode is used when a frame rate of 24P, 24PA, or 24PN is selected in a recording

format regardless of TC MODE setting.

Selects the user bits to be recorded when recording signals from a device connected to the TC IN

connector.

●ON: Records the user bits of the signal input to the TC IN connector.

●OFF: Records the user bits selected in the menu option UB MODE.

TC IN UB REGEN

• Setting this option to ON prioritizes the input signal over the settings made in the menu option UB

• No user bits are recorded when the input signal does not contain any user bits.

• Settings of the menu option UB MODE are used when no signal is input to the TC IN connector.

Set the content for user information.

●USER: Records the information of user.

●TIME: Records the time at recording.

●DATE: Records the date at recording.

●TCG: Records the values of the time code generator.

●FRM. RATE: Records the frame rate information for frame conversion.

a: Checking information for user information

UB MODE

b: Frame sequence No.

• 0 to 4 are displayed in 24P/24P (ADV) mode.

• F is displayed in 60i/30P mode.

c: Frame rates

• Frame rate (60/30/24)

• I/P ID

• Conversion data

• Frame rate coefﬁcient

d: Recording management data

• Frame update information

• REC START/STOP information

114

Setup menu list

Description of settings (Items in bold are factory settings.)

720P/30PN, 720P/24PN, 480i/60i, 480i/30P, 480i/24P, 480i/24PA

MODE.