3B SCIENTIFIC PHYSICS 1003309 Instruction Sheet - Page 3
Browse online or download pdf Instruction Sheet for Power Supply 3B SCIENTIFIC PHYSICS 1003309. 3B SCIENTIFIC PHYSICS 1003309 12 pages. High voltage power supply 5 kv (115-230 v, 50/60 hz)
Print Page
3B SCIENTIFIC
High Voltage Power Supply 5 kV (115 V, 50/60 Hz)
High Voltage Power Supply 5 kV (230 V, 50/60 Hz)
1003309 (115 V, 50/60 Hz)
1003310 (230 V, 50/60 Hz)
Instruction sheet
06/12 ALF
1. Safety instructions
The 5 kV high voltage power supply conforms to all
safety regulations for electrical measuring, control,
monitoring and laboratory equipment, as specified
under DIN EN 61010, Section 1, and the equipment has
been designed to meet protection class I. It is intended
for operation in a dry environment, suitable for the
operation of electrical equipment and systems.
Safe operation of the equipment is guaranteed,
provided it is used correctly. However, there is no
guarantee of safety if the equipment is used in an
improper or careless manner.
If it may be assumed for any reason that non-
hazardous operation will not be possible (e.g. visible
damage), the equipment should be switched off im-
mediately and secured against any unintended use.
In schools and other educational institutions, the
operation of the power supply unit must be super-
vised by qualified personnel.
®
PHYSICS
•
•
•
•
•
1
1
Ventilation slots
2
Voltage display
3
High voltage output
4
Earthing socket
5
Heater voltage output
6
Mains on/off switch
7
Power on display (LED)
8
High voltage regulator
9
Carrying handle
Before using the power supply unit for the first
time, confirm that the specifications printed
on the rear side of the housing are compatible
with the local mains voltage.
Before using the power supply unit for the first
time, check the housing and the mains lead for
any damage. In the event of any malfunc-
tion/operational defect or visible damage,
switch off the unit immediately and secure it
against unintended use.
The instrument may only be connected to the
mains via a socket that has an earth connec-
tion.
Before making any connections, check the
experiment leads for damaged insulation and
exposed wires.
Replace a faulty fuse only with one matching
the specifications stated at the rear of the
housing.