AquaScape 96031 Instruction And Maintenance Manual - Page 3
Browse online or download pdf Instruction And Maintenance Manual for Water Filtration Systems AquaScape 96031. AquaScape 96031 20 pages. Automatic dosing systems for ponds/ fountains
Also for AquaScape 96031: Instructions & Maintenance (16 pages), Instructions & Maintenance (20 pages), Instruction And Maintenance Manual (20 pages)
Contents
No.
Description
1.
(1) Automatic Dosing System
2.
(1) 6-Watt Transformer
3.
(1) Discharge Tubing (6')
4.
(1) Output Hose Holder
5.
(1) Water Treatment
6.
(1) Mounting Plate
3
Safety Information
WARNING: Risk of electric shock – This
product has not been approved for use
in swimming pool or marine areas.
WARNING: To provide continued protection
against risk of electric shock, connect to
properly grounded, ground fault circuit
interrupter (GFCI) outlets only.
PLEASE NOTE: Aquascape Automatic
Dosing System water treatments have been
specifically formulated to work with the
Aquascape Automatic Dosing System.
Using water treatments not designed for use
with the system may permanently damage the
unit and void the warranty.
WARNING:
This product is weatherproof but is not
designed to be submersed in the water or operated
at ambient temperatures below 40°F/4°C.
☎
www.aquascapeinc.com |
Contents
5
☎
CAN 1-866-766-3426 |
US 1-866-877-6637
1
- Have a qualified electrician install a properly grounded
receptacle outlet, acceptable for outdoor use when protected
from direct sunlight, snow and rain. If possible, locate the outlet
or filter so that the power cord will reach the outlet without an
extension cord.
- Inspect cord for damage before using.
If an extension cord is required, be sure it is rated for outdoor
use.
- Any wiring of this product should be performed by a qualified
electrician to ensure code compliance and user safety.
- To reduce risk of electrical shock, all wiring and junction
connections should be made per local codes. Requirements
may vary depending on usage and location.
- The power cable should be protected at all times to avoid
punctures, nicks or abrasions.
- Never handle power cords with wet hands.
- Unplug system at receptacle outlet when not in use.
- Do not remove cord and strain relief. Do not connect conduit to
product.
- Do not use power cable to lift the Automatic Dosing System.
6
2
4
3