AQUASONIC AQ339 Installation Manual - Page 11

Browse online or download pdf Installation Manual for Speakers AQUASONIC AQ339. AQUASONIC AQ339 12 pages. Underwater loudspeakers
Also for AQUASONIC AQ339: Installation Manual (12 pages)

Print Page
The speaker is buzzing:
•
In-wall installation: Insure the lock tab is properly inserted behind the lock tab receiving plate.
•
Drop-in use: Insure the speaker is not vibrating against the pool wall.
The speaker stopped working:
•
If the speaker stops playing, it is likely that the built-in protection circuit has activated. In the event
this happens, turn the amplifier off for approximately 60 seconds to allow the circuit to reset. Turn
down the volume on the stereo system and amplifier. Operate the system at lower volume levels
to avoid overloading the speaker.
•
If the speaker still does not play, check to insure all wiring connections are properly connected and
that output is coming from the audio system.
The speaker has low output:
•
Check the amplifier/receiver output settings to insure they are properly set.
•
If you are using a DVD/CD/MP3 player, insure the output volume is set correctly.
For additional questions/concerns/issues, contact Clark Synthesis or check our web
site.
MANUFACTURER CONTACT INFORMATION:
Clark Synthesis, Inc.
8020 Southpark Circle, Suite 600
Littleton, CO 80120
Phone: 303-797-7500
Fax: 303-797-7501
Web: www.clarksynthesis.com
www.clarksynthesis.com

TROUBLESHOOTING

11
Underwater Speaker