Panasonic WV-SC386 Installation Manual - Page 10
Browse online or download pdf Installation Manual for Camcorder Panasonic WV-SC386. Panasonic WV-SC386 36 pages. Ip video cameras
Also for Panasonic WV-SC386: Specification (2 pages), Integration Note (8 pages)
Print Page
[Precautions for use]
When the camera has an internal thermal problem
during operation, the indication "OVER HEAT" will
be displayed.
In this case, turn off the power immediately, and then con-
tact your dealer.
This product is designed to be used indoors. This
product is not operable outdoors.
This product has no power switch.
When turning off the power, turn off a circuit breaker.
To keep on using with stable performance
Do not use this product in hot and humid conditions for a
long time. Failure to observe this causes component deg-
radation resulting in life shortening of this product. Do not
expose this product to direct heat sources such as a
heater.
Do not touch the dome cover with your bare hands.
The dirty dome cover causes deterioration of picture qual-
ity.
Handle this product with care.
Do not drop this product, nor apply shock or vibration to
the product. Failure to observe this may cause trouble.
About the PC monitor
When displaying the same image on the monitor for a long
time, the monitor may be damaged.
It is recommended to use a screen-saver.
When an error is detected, this product will restart
automatically.
This product will be inoperable for around 2 minutes after
the restart just as when the power is turned on.
Product disposal/transfer
Data saved on this product or a storage device used with
this product may lead to personal information leakage.
When it is necessary to dispose or give this product to
someone, even when for repair, make sure that there is no
data on this product.
Cleaning this product body
Be sure to turn off the power before cleaning. Failure to
observe this may cause injury. Do not use strong abrasive
detergent when cleaning this product. Otherwise, it may
cause discoloration. When using a chemical cloth for
cleaning, read the caution provided with the chemical
cloth product.
IMPORTANT:
• The camera position may be moved inadvertently while
cleaning the camera body. Restart the camera or
refresh the camera position (position refresh) to correct
the camera position. Refer to the Operating Instructions
(included in the CD-ROM) for further information.
10
Keep the product away from water.
It may cause a malfunction.
Transmission interval
Image transmission interval may become slow depending
on the network environment, PC performance, shooting
subject, access number, etc.
About SDHC/SD memory card
• Before inserting the SDHC/SD memory card, turn off
the power of this product first. Otherwise, it may
cause malfunction or damage data recorded on the
SDHC/SD memory card. Refer to page 23 for
descriptions of how to insert/remove an SDHC/SD
memory card.
• When using an SDHC/SD memory card, format it
using this product. Recorded data on the SDHC/SD
memory card will be deleted when formatted. If an
unformatted SDHC/SD memory card or an SDHC/SD
memory card formatted with other devices is used,
this product may not work properly or performance
deterioration may be caused. Refer to the Operating
Instructions (included in the CD-ROM) for how to for-
mat a SDHC/SD memory card.
• When some SDHC/SD memory cards are used with
this product, the product may not work properly or
performance deterioration may be caused. Use the
SDHC/SD memory cards recommended in page 33.
Code label
The code labels (accessory) are required at inquiry for
trouble. Use caution not to lose these labels. It is recom-
mended to paste one of the labels onto the CD-ROM
case.
About the MOS image sensor
• When continuously shooting a bright light source such
as a spotlight, the color filter of the MOS image sen-
sor may have deteriorated and it may cause discolor-
ation. Even when changing the fixed shooting direc-
tion after continuously shooting a spotlight for a cer-
tain period, the discoloration may remain.
• When shooting fast-moving subjects or performing
panning/tilting operations, objects crossing the shoot-
ing area may look to be bending askew.
MPEG-4 Visual Patent Portfolio License
This product is licensed under the MPEG-4 Visual Patent
Portfolio License for the personal and non-commercial
use of a consumer for (i) encoding video in compliance
with the MPEG-4 Visual Standard ("MPEG-4 Video") and/
or (ii) decoding MPEG-4 Video that was encoded by a
consumer engaged in a personal and non-commercial
activity and/or was obtained from a video provider
licensed by MPEG LA to provide MPEG-4 Video. No
license is granted or shall be implied for any other use.
Additional information including that relating to
promotional, internal and commercial uses and licensing
may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.