Panasonic WV-SF342 Installation Manual - Page 21

Browse online or download pdf Installation Manual for Camcorder Panasonic WV-SF342. Panasonic WV-SF342 48 pages. Ip video cameras
Also for Panasonic WV-SF342: Specifications (2 pages), Installation Manual (44 pages), Features & Specifications (2 pages), Integration Note (8 pages)

Print Page

Preparations

When installing the camera on a wall or a ceiling, there are four methods as specified below.

(☞ Pages 22 and 23)

• Using the two-gang junction box

• Installing the camera directly on the ceiling or wall

• Using the ceiling mount bracket WV-Q174 (option) (for embedded installation on a ceiling)

SF336

SF335

• Using the ceiling mount bracket WV-Q105*

Important:

• Procure 4 screws (M4) to secure the camera to a wall or a ceiling according to the material of

the installation area. In this case, wood screws and nails should not be used. For mounting a

camera on a concrete wall, use an anchor bolt (for M4) or an AY plug bolt (M4) for securing.

(Recommended tightening torque: 1.6 N·m {1.18 lbf·ft})

• Required pull-out capacity of a single screw/bolt is 196 N {44 lbf} or more.

• If a ceiling board such as plaster board is too weak to support the total weight, the area shall

be sufficiently reinforced or the ceiling mount bracket for the camera, WV-Q105 (option), must

be used.

The mounting conditions of the camera are described as follows:

Installation

Applicable mount

place

bracket

Ceiling/wall

Two-gang junction

box

Ceiling/wall

(Direct mounting)

SF336

SF335

Ceiling

WV-Q174 (approx.

280 g {0.62 lbs})

Ceiling

WV-Q105*

150 g {0.33 lbs})

*1 PAL models only

*2 Make sure that the installed mount bracket can support more than 5 times of the weight of the

camera.

SF332

Recommended

screw

SF332

–

(approx.

–

(option) (for direct mounting on a ceiling)

Number of

screw

4 pcs.

–

Minimum pull-out

strength (per 1 pc.)

196 N {44 lbf}