Panasonic WV-SW559 Installation Manual - Page 36

Browse online or download pdf Installation Manual for Camcorder Panasonic WV-SW559. Panasonic WV-SW559 48 pages. Ip video cameras
Also for Panasonic WV-SW559: Specification (2 pages), Integration Note (8 pages)

Print Page

Adjust the angular field of view and the focus.

Adjust the angular field of view in accordance with the distance between the camera lens and a

photographic subject. These adjustments shall be performed together with the camera angle

adjustment.

q Loosen the zoom lock knob and move the knob between TELE and WIDE to obtain the appro-

priate angle of view.

w Press the auto focus (AF) button twice quickly to perform basic adjustments. The lamp blinks

during auto focus (AF) adjusting. When the adjustment is completed, adjust the viewing angle

while watching the screen.

Note:

• The focus may not be adjusted appropriately when the zoom lock knob is positioned at the

"W" (or "T") end. In this case, adjust the focus again by slightly turning the zoom lock knob to

the direction of "T" (or "W").

• With basic adjustments, the focus can be adjusted quickly. For more accurate adjustments use

the detailed adjustments.

e To adjust the angular field of view with a higher zooming effect even after turning the zoom lock

knob almost fully in the "T" direction, hold down the auto focus (AF) button/extra optical zoom

button for 5 seconds or more. 2x extra optical zoom will be applied. When the image capture

size under "VGA" is applied, the zoom factor can be adjusted up to 2x without deterioration of

image quality. When holding down the auto focus (AF) button/extra optical zoom button again

for 5 seconds or more, 1x extra optical zoom will be applied.

r Tighten the zoom lock knob.

t After fixing the viewing angle, press the auto focus (AF) button once. The auto focus lamp lights

for about 10 seconds, and a detailed adjustment for the focus is automatically performed.

Zoom lock knob

Loosen

Tighten

Auto focus (AF) button/

Extra optical zoom button

Focus ring

* Do not move the focus ring.