Panasonic WVNP1000 - NETWORK CAMERA Manual

Browse online or download pdf Manual for Camcorder Panasonic WVNP1000 - NETWORK CAMERA. Panasonic WVNP1000 - NETWORK CAMERA 2 pages. Ip video cameras
Also for Panasonic WVNP1000 - NETWORK CAMERA: Operating Instructions Manual (28 pages), Integration Note (8 pages)

Panasonic WVNP1000 - NETWORK CAMERA Manual
Mega-Pixel MPEG-4/JPEG dual streaming network camera
Key Features
• MPEG-4/JPEG digital signal output at VGA image size with up to 30 ips.
• MPEG-4 and JPEG dual stream output for simultaneous live
monitoring and high resolution recording.
• Progressive output provides clear images, even when the subject is
moving.
• High sensitivity with Day-Night function: 1.0 lux (Color), 0.06 lux
(B/W) at F1.4.
• Adaptive Digital Noise Reduction: 2D-DNR and 3D-DNR integration
ensures reduced noise in various conditions.
• Electronic sensitivity enhancement: Auto (Up to 10x) / Manual (Up to 32x).
• Electronic shutter: Up to 1/10,000 sec.
• Video Motion Detector with 4 programmable detection areas and 3
sensitivity levels.
• Up to 8 Privacy zones
• Auto image stabilizer for applications where vibration or wind is a concern.
• Flexible digital zoom and pan/tilt operation: Up to 5x variable digital
zoom and pan/tilt can be set in the setup menu or controlled by a
system controller (effective both for analog and network video).
2x or 4x digital zoom and pan/tilt can be controlled by the browser
GUI for network video.
• Internal / Multiplexed Vertical Drive (VD2) synchronization.
• Camera title displays: Up to 16 (OSD) and 20 (on browser)
alphanumeric characters.
• SD Memory card slot for alarm recording and backup upon network
failure. Recorded dada can be downloaded by using FTP command.
• Auto Back Focus (ABF) ensures easy installation and stable focus in
both color and B/W modes.
• Alarm sources including Terminal input, VMD and Panasonic alarm
command can trigger actions including SD memory recording/FTP
image transfer, E-mail notification, Alarm indication, Terminal output
and Panasonic protocol output.
• Built-in microphone for audio (one-way).
• Built-in network interface (10Base-T / 100Base-TX).
Day-Night Network Camera
WV-NP1000
WV-NP1004
(24V AC)
Lens: optional
• Multiscreen: Images from 8 cameras can be displayed in two
separate Quad screens (JPEG only). 20 characters camera title is
available for each camera.
• FTP client function enables periodic image data transfer or transfer
upon alarm.
• Alarm e-mail notification
• Max bit rate/client for MPEG-4 (64 / 128 / 256 / 512 / 1,024 / 1,536 /
2,048 / 3,072 / 4,096 kbps) combined with Total bit rate control (64 /
128 / 256 / 512 / 1,024 / 2,048 / 4,096 kbps / 10 Mbps / Unlimited)
allowing flexible network management.
• Supported Protocol: TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP,
DNS, DDNS, NTP, RTP and SNMP.
• Multi-language GUI and setup menu: English, French, Italian,
Spanish, German, Chinese, Russian (PAL), English, French
(NTSC), (Installation required except for English).
Standard Accessories
• CD-ROM* .......................................1 pc.
• Operating Instructions
(English version) ........................... 1 pc.
• ALC lens connector cap ............... 1 pc.
• Power cord
(only for the WV-NP1000) ............. 1 pc.
Optional Accessory
1/3-type 2x Varifocal Lens
WV-LZA62/2
(2.8 ~ 6 mm)
F1.4 (wide)
F2.1 (tele)
Mega-Pixel
Series
WV-NP1000
(220V ~ 240V AC)
WV-NP1004
(24V AC)
The following is for the installation.
• Cord label ..................................... 1 pc.
* The IP setting software, the viewer software and
the network operating instructions (PDF) are
included on the CD-ROM.