Panasonic 42PWD8UK - 42" Plasma Panel Operating Instructions Manual - Page 24

Browse online or download pdf Operating Instructions Manual for TV Panasonic 42PWD8UK - 42" Plasma Panel. Panasonic 42PWD8UK - 42" Plasma Panel 48 pages. Progressive wide plasma display

Print Page

PICTURE Adjustments

Item

Effect

PICTURE

Less

BRIGHTNESS

Darker

COLOR

Less

TINT

Reddish

SHARPNESS

Less

ADVANCED SETTINGS

Item

Effect

BLACK

EXTENSION

Less

INPUT

LEVEL

Less

W/B HIGH R

Less

W/B HIGH B

Less

W/B LOW R

Less

W/B LOW B

Less

GAMMA

Down

AGC

OFF

Notes:

• Carry out "W/B" adjustment as follows.

1. Adjust the white balance of the bright sections using the "W/B HIGH R" and "W/B HIGH B" settings.

2. Adjust the white balance of the dark sections using the "W/B LOW R" and "W/B LOW B" settings.

3. Repeat steps 1 and 2 to adjust.

Steps 1 and 2 affect each other's settings, so repeat each step in turn to make the adjustment.

• The adjustment values are memorized separately for each input terminal.

• The adjustment range values should be used as an adjustment reference.

Helpful Hint (

On the remote control unit, while the "ADVANCED SETTINGS" menu is displayed, if either the N button is pressed at

any time or the ACTION ( ) button is pressed during "NORMALIZE", then all adjustment values are returned to the

factory settings.

Adjustments

Adjusts the proper picture contrast.

Adjusts for easier viewing of dark

pictures such as night scenes and

Brighter

black hair.

Adjusts color saturation.

Adjusts for natural ﬂ esh tones.

Greenish

Adjusts picture sharpness.

Adjusts the dark shades of the image in gradation.

Adjustment of parts which are extremely bright and hard to see.

(This cannot be adjusted when the input signal is DVI.)

Adjusts the white balance for light red areas.

Adjusts the white balance for light blue areas.

Adjusts the white balance for dark red areas.

Adjusts the white balance for dark blue areas.

S CURVE

Increases the brightness of dark signal automatically.

Normalization)

NORMALIZE

Notes:

• "COLOR" and "TINT" settings cannot be

• You can change the level of each function

• The setting details for STANDARD,

• The "TINT" setting can be adjusted

• In PICTURE, there is not a noticeable

Details

2.0

2.2

2.5

adjusted for "RGB/PC" and "DVI" input

signal.

(PICTURE, BRIGHTNESS, COLOR, TINT,

SHARPNESS) for each PICTURE MENU.

DYNAMIC and CINEMA respectively

are memorized separately for each input

terminal.

for NTSC signal only during "VIDEO

(S VIDEO)" input signal.

change even when contrast is increased

with a bright picture or reduced with a dark

picture.