Panasonic CT-13R32C Operating Instructions Manual - Page 5
Browse online or download pdf Operating Instructions Manual for TV Panasonic CT-13R32C. Panasonic CT-13R32C 13 pages. Panasonic ct-13r32: user guide
Also for Panasonic CT-13R32C: Operating Instructions Manual (13 pages)
Print Page
LOCK
Refer to your V-CHIP manual for the operation of
LOCK menu.
FM Radio Operation
(Models CT-13R32C, CT-13R42C, CT-13R52D,
CT-20D11D, CT-20G6D, CT-25G6C)
Some televisions have built-in FM tuner. You can pre-
program up to 9 different FM stations. Use the follow-
ing procedure to program the FM stations.
Procedure
1.
Press TV/VIDEO button on the remote control
twice to get into FM mode.
2.
Press ACTION button to display MENU Icons.
pq
tu
3.
Press
or
to highlight the SET UP icon.
4.
Press ACTION button to display the SET UP
menu.
p
q
5.
Press
or
button to highlight PROG CHAN.
u
6.
Press
button to highlight FM ANTENNA.
PROG CHANNEL
CC
FM ANTENNA
OTHER ADJ.
FM PROGRAM
t
u
7.
Press
or
button to select INT or EXT.
•
INT - For Cable TV users.
•
EXT - For antenna users.
q
8.
Press
button to highlight FM Program.
u
9.
Press
button to display FM PROGRAM screen.
SET UP
FM PROGRAM
FM POSITION 1 87.5 MHZ
u
TO ADD
PRESS ACTION TO EXIT
10. Press numeric keys 1 through 9 on the remote
control to select the appropriate FM position.
p
q
11. Press
or
button to select the desired FM
frequency.
u
12. Press
button to add the station to memory.
13. Repeat steps 10 through 12 until all 9 positions
have been programmed into memory.
14. Press ACTION button to exit the programming
menu.
You can select any of the 9 stations by pressing the
appropriate number button on the remote control.
Tuning FM station manually
p
q
In FM mode, press
or
station frequency.
Note:
In FM mode, press R-TUNE button to toggle
between TV and FM radio.
u
INT
u
button to change the
AC/DC P
DC Models ONLY
This TV model operates on both standard
household current (120 volt, 60 Hz AC) and car
battery (12 volt negative ground DC) through the
cigarette lighter. An AC power cord and a car
cigarette lighter adapter cord are supplied.
Household Installation
Insert the AC power cord into the connection on
the rear of the TV. Connect the two pronged plug to
an AC outlet (120 volt, 60Hz). If you are unable to
insert the plug fully into the wall outlet, try reversing
it. If the plug does not fit, contact an electrician. Do
not force the plug or defeat the safety purpose of
the polarized plug.
Car Installation
Insert the power cord
into the connection on
the rear of the TV.
Remove the cigarette
lighter from your car and
insert the car cigarette
lighter adapter plug.
Note:
The supplied
car
cord
designed
use
with
negative
ground
battery only.
Helpful Hints: Do Not Overload the
Engine
Keep the engine idling while operating the TV,
especially when the temperature is low and when
viewing the TV for over an hour.
Do not operate the TV while starting the engine.
Disconnect the power cord from cigarette lighter
when not in use.
Fuse Replacement
If the TV does not turn on, the cigarette lighter
adapter fuse may have blown.
Procedure
•
Turn TV OFF and unplug the power cord
from the cigarette lighter.
•
Remove the cap and replace the fuse,
as shown in illustration.
•
Insert the supplied spare fuse and
replace cap.
Car Cord Plug with Fuse and Cap
Note:
Use
only
replacement.
Helpful Hints: Keeping Lighter
Socket Clean
Always keep the cigarette lighter socket clean for
better contact. A bad contact can overheat the
car cord plug.
- 5 -
S
OWER
OURCES
AC/DC Power Cord
Connections
is
(12V/DC)
for
a
(120V/AC)
a
7A-125V
fuse
for