Panasonic CT-2006S Operating Instructions Manual - Page 3
Browse online or download pdf Operating Instructions Manual for TV Panasonic CT-2006S. Panasonic CT-2006S 13 pages. Tv monitor/receiver
Also for Panasonic CT-2006S: Operating Instructions Manual (13 pages)
Print Page
Cable / Antenna
For proper reception, either a cable or antenna
connection are required.
Cable Connection
Connect the cable supplied by your local
cable company.
A cable converter box may be required for
proper reception. Check with your local
Cable
company
requirements.
Incoming Cable from Cable Company
75 Ohms VHF/UHF
on back of TV
Antenna Connection
•
For
proper
channels, an external antenna is required.
For best reception an outdoor antenna is
recommended.
•
Antenna Mode must be set to TV.
VHF/UHF Antenna
A VHF/UHF antenna and transformer are
supplied in some models. Attach to the TV,
adjust the antenna until the picture is clear.
(See Antenna Connection).
Incoming Cable from Home Antenna
Note:
Cable Mode is preset at the factory.
Antenna users must change to Antenna
Mode in the Set Up Menu.
Terminals on back of TV (some models)
STEREO MODELS
Jack used for
Jack used for
Jack used for
Jack used for
1/8" earphone plug
1/8" earphone plug
1/8" earphone plug
1/8" earphone plug
(some models)
(some models)
(some models)
(some models)
for
compatibility
reception
of
VHF/UHF
(Cables not supplied)
Terminals on front of TV (some models)
VIDEO
L -AUDIO- R
VIDEO
L -AUDIO- R
O
PTIONAL
C
ONNECTIONS
Procedure
1.
Connect equipment as shown to front or
rear Audio/Video input jacks.
Note:
2.
Select the Video mode by pressing TV/
VIDEO button.
3.
Operate optional equipment as instructed
in equipment manual.
Note:
VCRs, video disc players, video game
equipment, and DSS equipment can also
be connected to the antenna input
connection.
manual).
To Audio Amplifier
Connect to an external audio amplifier input for
listening to sound from a stereo system.
Note:
TO AUDIO AMP terminals cannot be used
directly for external speakers.
Audio Adjustments
1.
Select TV SPEAKERS ON from AUDIO
menu.
2.
Set amplifier volume to minimum.
3.
Adjust TV volume to desired level.
4.
Adjust amplifier volume to match the TV.
5.
Select OFF&VAO from AUDIO menu.
6.
Volume and mute are now selected using
the TV controls.
Note:
In OFF&FAO the volume is controlled by
the external amplifier.
VCR or Video Disc
Terminals on back of VCR
MONO MODELS
Jack used for
Jack used for
Jack used for
Jack used for
Jack used for
Jack used for
Jack used for
Jack used for
1/8" earphone plug
1/8" earphone plug
1/8" earphone plug
1/8" earphone plug
1/8" earphone plug
1/8" earphone plug
1/8" earphone plug
1/8" earphone plug
(some models)
(some models)
(some models)
(some models)
(some models)
(some models)
(some models)
(some models)
- 3 -
E
QUIPMENT
Front and rear Audio/Video
connections
cannot
operated at the same time.
(See
your
equipment
(some models)
VIDEO
AUDIO
be