Panasonic CT-2769S Operating Instructions Manual - Page 7

Browse online or download pdf Operating Instructions Manual for TV Panasonic CT-2769S. Panasonic CT-2769S 32 pages.
Also for Panasonic CT-2769S: Manual (16 pages)

Print Page
PICTURE In PICTURE (PIP) OPERATION
Picture In Picture (PIP) Operation
PIP Operation with a VCR and Cable Box
This television includes a Picture In Picture (PIP) feature.
A second video
source (VCR, Camcorder, etc.) is required to provide a second picture.
Connect your television to a VCR and Cable Box, as shown.
(Some models
have only one video input and some models have an S-VIDEO video input.)
CABLE BOX
TERMINALS ON BACK OF Tv
©
Incoming
l
Of
Cable
{p
TIPO
+
LES
AUDIO OUT
0)
Cable Splitter
TO AUDIO
(Nat Supplied)
AMP
CABLES NOT SUPPLIED
Note:
The Remote Control must be programmed with supplied codes to
operate the VCR and Cable Box.
See Programming the Remote
Control in the Remote Control Quick Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame.
Note:
The PIP picture is the same as the main picture, initially.
To view a different picture in the PIP frame:
.
Press the TV/VIDEO button on the Remote Control to select
the video PIP source.
Note:
Verify the CABLE BOX and VCR are ON and the VCR
tuned to channel 3.
.
Choose channels for the PIP frame by pressing the CABLE
button on the Remote Control and using the numeric keypad
or CH up/down buttons.
.
Choose channels for the Main Picture by pressing the TV
button on the Remote Control and using the numeric keypad
or CH up/down buttons.
xa
|/
Nye st
SWAP Button
The SWAP
button
switches
the PIP and
Main
Picture source.
Press the RECALL button for PIP
and Main Picture source status, on screen.