Panasonic CT-27D21 Operating Instructions Manual - Page 7
Browse online or download pdf Operating Instructions Manual for TV Panasonic CT-27D21. Panasonic CT-27D21 50 pages. 36" diagonal stereo monitor-receiver
Also for Panasonic CT-27D21: Operating Instructions Manual (50 pages), Operating Instructions Manual (25 pages)
Print Page
0373 -1E.fm Page 6 Monday, February 26, 2001 3:47 PM
I
NSTALLATION
Optional Cable Connections
AC Power Supply Cord
Cable / Antenna Connection
6
Shielded audio and video cables should be used between components. For best
results:
r
Use 75-ohm coaxial shielded cables.
r
Use appropriate input and output connectors, that match your component connectors.
r
Avoid long cables to minimize interference.
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH WIDE
BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY
INSERT.
DO NOT USE A PLUG WITH A RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER,
CRIMPED, BENT OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE
RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.
For proper reception, either a cable or antenna connection is required.
Cable Connection
Connect the cable supplied by your local cable company.
Note:
A cable converter box may be required for proper reception.
Check with your local cable company for compatibility
requirements.
Antenna Connections
r
For proper reception of VHF/UHF channels, an external antenna is required. For best
reception an outdoor antenna is recommended.
r
Antenna Mode must be set to TV.
Cable Preset
Cable Mode is preset at the factory. Antenna
users must change to Antenna Mode in the
Setup Menu.
Polarized plug
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of TV
Incoming Cable from
Home Antenna