Panasonic CT-27G30CT Operating Instructions Manual - Page 10

Browse online or download pdf Operating Instructions Manual for TV Panasonic CT-27G30CT. Panasonic CT-27G30CT 36 pages.
Also for Panasonic CT-27G30CT: Operating Instructions Manual (17 pages)

Print Page

Control Operation

Power B utton

- Pressthe POWER button to turn

ON. Press again to turn OFF.

POWER

Volume

Button

Press the VOLUME (VOL)

LEFT or RIGHT button for desired listening level (when

On Screen Menus are not displayed).

Decreases

Volume Level

Increases

Jme Level

Located On Remote Control

Channel Change - (Two

options)

Option

Press the CHANNEL (CH) UP or DOWN button to

sequentially scan through programmed channels

(when On Screen Menus are not displayed).

NOTE: TV/AUX/CABLE

switch (located on Remote)

must be set in TV position.

TV/AUX/CABLE

Located On Remote Control

Selects Ne

LowerChannel

Selects Next

Higher Channel

Option 2.

Press two digits on keyboard (Example press 0,

then 5 for channel 05). For channels over 99, press

three digits on keyboard.

Mute Button

Press the MUTE button to

quickly

reduce sound level (Mute will appear on screen). Press

again to restore sound.

MUTE

Helpful Hints:

• Helpful information will display On Screen momen-

tarily when Receiver is first turned on and when the

channel is changed.

• When using keyboard entry for channels 10,11 and

12 in the CABLE mode there is a slight delay before

channel change because of the capability of tuning

cable channels 100 to 125.

• If you do not receive channels above 13, confirm the

type of signal at ANT Input (TV or Cable) and set the

TV or Cable Tuning Mode accordingly. (Refer to Set

Up Feature, Antenna selection.)

NOTE: If "SPEAKER OFF" is displayed On Screen

after pressing the VOLUME button, refer to

Audio Menu to turn Speakers "ON".

]

I®

®1

I1®

®1

I®

®1

I_c

VCR Function Buttons - TheVCRFUNC-

TION

buttons have been designed to operate numerous

brands of VCRs. The infra-red code must be obtained

priorto use. (Please refer to Programming the Universal

Remote for programming instructions.)

NOTE: The TV/AUX/CABLE

switch (located on Re-

mote) must be in the AUX position (Center). The

VCR-LDP switch must be in the VCR position.

TVlAUX/CABLE

VCR

POWER

RECORD I

F-1 r"-n _

REW

PLAY

MOVE

SIZE

PIP

TVNCR

STOP

PAUSE

r-1Fi-7

r-7

FREEZE

SWAP

vCR/LDP

VCR CHANNEL

-10-