Panasonic CT-27G33 Operating Instructions Manual - Page 6
Browse online or download pdf Operating Instructions Manual for TV Panasonic CT-27G33. Panasonic CT-27G33 17 pages. 27" diagonal stereo monitor-receiver
Also for Panasonic CT-27G33: Operating Manual (36 pages), Operating Instructions Manual (18 pages)
Print Page
Picture In Picture (PIP) Operation
PICTURE
IN PICTURE
(PIP)
OPERATION
With I Without
A VCR And Cable Box
This television includes a two tuner Picture In Picture (PIP) feature. This allows watching'_o-
(2) live broadcasts at the same time without or with an external video source (VCR).
Without
A VCR (External
Video Source)
Procedure
•
Connect incoming cable to antenna (ANT) input on back of TV.
•
Press the PIP button on the Remote Control to display the PIP frame.
Note:
The audio is for the Main Picture, only.
•
- Choose. channels for the PiP frame by pressing the Remote Control PIP
CHANNEL up/down buttons.
•
Choose channels for the Main Picture by pressing the Remote Control CH
up/down buttons or by using the numedc keypad.
With A VCR (External Video Source) And Cable Box
Connectyourtelevision to a VCR and CableBox,as shown.
TERMINALS
ON BACK OF TV
VCR
CABLEBOX
Incoming
Cable
Cable Splitter
(Not Supplied)
CABLES NOT SUPPLIED
Note:
The Remote Control must be programmed
with supp/ied codes to operate the VCR
and Cab/e Box. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
Procedure
Note:
Press the PIP button on the Remote Control to display the PIP frame.
Note:
Theaudiois fromthe Main Picture only.
i
To view scrambled channels through your Cable Box in the PIP frame:
•
Press the W/VIDEO
button on the Remote Control to select the same video
input which your cable box is connected to.
•
Verify the CABLE'BOX and VCR are ON and the VCR tuned to channel 3.
•
Choose channels for the PiP frame by pressing the CBL button on the Remote
Control and using the numeric keypad or CH up/down buttons.
•
Choose channels for the Main Picture by pressing the TV button on the Remote
Control and using the numeric keypad or CH up/down buttons.
TheSWAP button switchesthe PIP and MainPicturesource. Press the RECALL button forPiP
andMain Picture sourcestatus, on screen.
El