Panasonic CT-31SF20R Operating Instructions Manual - Page 31

Browse online or download pdf Operating Instructions Manual for TV Panasonic CT-31SF20R. Panasonic CT-31SF20R 44 pages.

Print Page
Set Day
- The day of the week must be set in order to
operate the dual timer feature.
1.
Press the ACTION button to display the Main Menu.
2.
Press the ADVANCE • / • and • / • button re-
peatedly until the Set-Up ICON is highlighted.
3.
Press the ACTION
button to display the Set-Up
Menu.
4.
Press the ADVANCE • or • button until Set Day is
highlighted.
5.
Press the ADVANCE
•
or •
button to
select
proper
day
of
the
week.
MAIN MENU
SET TIME
_AM
MODE
TV/ANT
CABLE
AUTOPROGRAM
NOYES
VlANUAL PROGRAM
NOYES
DISPLAY STEREO
NOYES
CAPTION FIELD
l'_-I
r'_'12
SPEAKER
ON OFF
PRESSACTIONTO EXIT
W/ANT-Cable
Tuning
Mode - Important Note:
The proper Input mode must be selected for the type
of signal at the antenna Input.
• W/ANT is used when the Receiver is not connected to
a Cable TV System, for example, when using a VHF/
UHF antenna (Channels 02-69).
• CABLE is used when the Receiver is connected to a
Cable TV System and you are not using a cable com-
pany converter box (Channels 01-125).
MAIN MENU
SET TIME
SET DAY
TV/ANT
_,UTOPROGRAM
vtANUAL PROGRAM
)ISPLAY
STEREO
CAPTION FIELD
SPEAKER
PRESS ACTION TO EXIT
8:23 AM I
NO YES
NO YES
NO YES
NINI2
ON OFF
1.
Press the ACTION button to display the Main Menu.
2.
Press the ADVANCE • / •
and •
/ • button re-
peatedly until the Set-Up Icon is highlighted.
3.
Press the ACTION
button to display the Set-Up
Menu.
4.
Press the ADVANCE • or •
button until MODE is
highlighted.
5.
Press the ADVANCE•
or • button to select TV/
ANT (mode) or CABLE (mode).
Auto Programming
- The Auto Programming fea-
ture allows you to place all channels with a video signal
into
Channel
Scan
memory.
Press
the
CHAN-
NEL • or • button and onlythose channelswJth a signal
will be accessed.
NOTE: "I'V/ANT-Cable tuning mode must be set properly
for your system.
1.
Press the ACTION button to display the Main Menu.
2.
Press the ADVANCE • / • and •
/ • button
re-
peatedly until the Set-Up Icon is highlighted.
3.
Press the ACTION
button to display the Set-Up
Menu.
4.
Press
the
ADVANCE•
or•
button
until Auto
Program is highlighted.
5.
Press
the
ADVANCE•button
to
start
Auto
Programming. Channels will automatically advance
until all channels have been scanned.
•
Channel numbers with signal present will turn blue
which indicates stored in Channel Scan memory.
,_lb.
MAIN MENU
SET TIME
SET DAY
MODE
8:23 AM I
SUN
J
"rV/ANT CABLEI
I YESI
. PROGRAM
NO YESJ
DISPLAY STEREO
NO YESI
CAPTION FIELD
1" 11" 21
SPEAKER
ON
OFF]
PRESS ACTION TO EXIT
- 31 -