AquaStar 32CDAV SERIES Installation Instructions Manual - Page 11

Browse online or download pdf Installation Instructions Manual for Lighting Equipment AquaStar 32CDAV SERIES. AquaStar 32CDAV SERIES 20 pages. Channel drain, submerged, suction, single, unblockable outlet instructions

Print Page
32PDxxx INSTALLATION CONTINUED
IMPORTANT
• Model: 32PDxxx
• Single or multiple drain use
• At IAPMO (a nationally recognized
testing lab), the Propeller™ Drain
sump and cover was tested at zero
inch sump depth
• All AquaStar channel drains are
VGB 2008 compliant
• Plumbing to one or two pumps plus
skimmer equalizer are approved –
DO NOT exceed maximum flow rate
of outlet cover for total system
• One-pipe connection can be any
size and centered along channel
slot in sump
• Any plumbing configuration is
approved but do not exceed
maximum flow rate
• IMPORTANT: To be considered
unblockable, the Propeller™ drain
sump must be permanently and
securely affixed to become an
integral part of the pool floor using
epoxy around the entire edge and
all of the enclosed plastic anchors or
optional brass anchors.
SHOTCRETE/GUNITE
GRAVEL
The sump must be permanently and securely affixed to the pool floor using epoxy under the sump and
around the entire edge and all of the enclosed plastic anchors or optional brass anchors. Once this is
completed, the sump becomes a permanent part of the pool structure, creating an unblockable drain.
The drain cover is then affixed to the sump using the designated screws.
SEAL PERIMETER WITH
EPOXY OR SILICONE
SHOTCRETE/GUNITE
32" PROPELLER DRAIN INSTALLATION INSTRUCTIONS
EPOXY OR SILICONE
SHOTCRETE/GUNITE
info
aquastarpoolproducts.com www.aquastarpoolproducts.com
@
fig. 4
32" PROPELLER DRAIN INSTALLATION INSTRUCTIONS
STEP 4
AFFIX THE UNBLOCKABLE SUMP TO THE POOL FLOOR
USING THE INCLUDED #10 X 1" SCREWS
TWO-PART
EPOXY
fig. 5
32" PROPELLER DRAIN INSTALLATION INSTRUCTIONS
STEP 5
TWO-PART
EPOXY
GRAVEL
fig. 6
STEP 6
TWO-PART
EPOXY
GRAVEL
UNBLOCKABLE SUMP
PLASTER
UNBLOCKABLE SUMP
PLASTER
AFFIX THE PINHOLE ANTI-ENTRAPMENT SUCTION
OUTLET COVER TO THE UNBLOCKABLE SUMP USING
THE INCLUDED #10 X 3/4" SCREWS
UNBLOCKABLE SUMP
PLASTER
11